: PAS Products like to give you a step
by step introduction how to do the right sound settings. PAS-Products
is working together with the Virtual Audio Cable Driver software VAC.
In this demo version a demo of VAC is in the setupfile. You will hear
a voice saying "TRAIL" in 7-25 sec steps. In the fullversion
of course not.
Install the demo version like this. You will find ademo version on our homepage www.pas-products.com/download.html
Close all programs before and than install the Virtual Audio Cable driver.
PLEASE read this 4 steps introduction relaxed and you will see it is very easy!
As you see below in the screen shot, the Graphic Equalizer is using the Windows Media Player output. But it could be also the Winamp, WaveLab, iTunes or any other application that is using a soud output device. Every playlist you have made runs thru the Graphic Equalizer correction and than to your speakers.
That sounds excellent.
Step 1. Open the Control Panel and select the Sound and Audio Devices.
Step 2. Select by Default device the Virtual Cable 1
Step 3. Run the Graphic Equalizer and select at "Soundcard" "Input Device" the "Virtual Cable 1" driver.
Step 4. Open the Output Device in the Graphic Equalizer and select the Output you like, here the RealTek HD Audio output is our choose but you can choose any driver you use for your output system.
Than click on the Full duplex Mode in the Graphic Equalizer.
Now all sounds you are playing on your system are runing thru the Graphic Equalizer.
( Winamp,Windows Media Player, iTunes, WaveLab, Cubase...)
Of course you can use all the other tools like Wave/Mp3 Player
and the Bacht restoration without the Virtual Audio Cable driver !!!
If you have any more questions please contact us here pas@pas-products.com
Please note: You must run the Graphic Equalizer when you like to hear windows sound
copyright 2010 PAS-Products